Delphi HP10187 fuel pump and sender assembly for the 1989-1991 Ford E-150 Econoline 6-cylinder 4.9L, V8 5.0L or 5.8L and other vehicles pumps fuel from the tank and reports the fuel level through its float arm. This Delphi fuel pump, also sold as a fuel pump hanger assembly, is built to Delphi's OE standards.
- Designed to operate under extreme temperatures with quick engine starts
- Metal tubes routed so they never touch the tank, which removes noise and vibration while driving
- Empty float height and float retention are set for a correct gas gauge reading
- Lower amperage draw puts less load on the vehicle's electrical system
- Validated and tested, and matched to the right vehicle application
Quick facts
- Part: Delphi HP10187 fuel pump and sender assembly
- Fits: 1989-1991 Ford E-150 Econoline 6-cylinder 4.9L, V8 5.0L or 5.8L and other vehicles
A weak pump or sender can show up as hard starting, sputtering under load or a gas gauge that reads wrong. A clogged fuel filter can also make an engine hard to start, so these signs alone do not prove the pump is the problem.
Fits
It also fits the 1989-1991 Ford E-150 Econoline Club Wagon 6-cylinder 4.9L, V8 5.0L or 5.8L and the 1989-1991 Ford E-250 Econoline 6-cylinder 4.9L, V8 5.0L or 5.8L. One pump goes in each vehicle.
Specifications
- Quantity per vehicle: 1
- Construction: hanger assembly with float arm and seal
In the box
One fuel pump and sender assembly with float arm, seal and instruction sheet.
Installation notes
- Check and clean the fuel tank before installing.
- An instruction sheet comes with the part for the steps.
Interchange: 951-3000 · 953-4143 · E9UZ 9H307-C · E9UZ 9H307-CA · PFS-26
4011141 · 4017050 · E2147S · E2487 · DHP10187 · 69100 · P74598S · P77323S · AFS0102S · RE0102S · C0047H · A27070 · E16270 · SP1138 · SP2019H · USEP2147S
This part cross-references / interchanges with the following part numbers:
4011141, 4017050, E2147S, E2487, DHP10187, 69100, P74598S, P77323S, 951-3000, 953-4143, AFS0102S, RE0102S, E9UZ 9H307-C, E9UZ 9H307-CA, PFS-26, C0047H, A27070, E16270, SP1138, SP2019H, USEP2147S
Frequently Asked Questions
Is the Delphi HP10187 a Ford E-150 Econoline fuel pump for the 1989-1991 model with a 6-cylinder 4.9L, V8 5.0L or 5.8L engine?
Yes. Delphi HP10187 fits the 1989-1991 Ford E-150 Econoline 6-cylinder 4.9L, V8 5.0L or 5.8L and other vehicles, so check your own car in the "Vehicles it fits" section.
Does the Delphi fuel pump assembly come with a float arm and seal?
Yes. Delphi HP10187 comes with the float arm, a seal and an instruction sheet.
How does this Delphi fuel pump replacement keep the gas gauge reading correct?
Its empty float height and float retention match OE specifications, which is meant to give a correct gas gauge reading.
How can I tell if this fuel pump and sender assembly is going bad?
Hard starting, sputtering or a gas gauge that reads wrong can be signs. A shop can test fuel pressure safely, so have it checked promptly rather than driving on it.
What should I do before putting in the Delphi pump?
Check and clean the fuel tank before installing, and follow the instruction sheet that comes with Delphi HP10187 for the steps.
