Delphi HP10258 fuel pump hanger for the 1987-1995 Chevrolet P30 V8 5.7L, the 1990-1993 P30 V8 7.4L, the 1990-1995 P30 V6 4.3L and other vehicles holds the fuel pump and float arm inside the fuel tank. It also carries the float arm used for the fuel gauge reading.
- Metal tubes routed clear of the tank, so tube-to-tank contact does not cause noise or vibration while driving
- Empty float height and float retention set for a correct gas gauge reading
- Lower amperage draw puts less load on the vehicle's electrical system
- Designed to operate under extreme temperatures with quick engine starts
- Validated, tested and matched to the right vehicle application
Quick facts
- Part: Delphi HP10258 fuel pump hanger
- Also called: fuel pump hanger assembly
- Fits: 1987-1995 Chevrolet P30 V8 5.7L, the 1990-1993 P30 V8 7.4L, the 1990-1995 P30 V6 4.3L and other vehicles
- Condition: New
Hard starting, a fuel gauge that reads wrong or a whine from the tank can mean the fuel pump hanger assembly is wearing out. Those signs alone do not prove the hanger is at fault; contamination in the fuel tank is another common cause.
Fits
The vehicles it fits include the 1987-1995 GMC P3500 V8 5.7L and the 1987-1989 Chevrolet P20 V8 5.7L, with one hanger per vehicle.
Specifications
- Quantity per vehicle: 1
- Condition: New
In the box
One fuel pump hanger with float arm, lock ring, seals and an instruction sheet.
Installation notes
- Check and clean the fuel tank before installing the hanger.
- Follow the included instruction sheet for the steps.
Interchange: FLS1066 · 4011194 · 4011220 · 4017189 · 4017191 · 4017192 · E3030H · DHP10258 · P77394H · 19179425 · 25094631 · 25094633 · FG12S · SP12S1H
This part cross-references / interchanges with the following part numbers:
FLS1066, 4011194, 4011220, 4017189, 4017191, 4017192, E3030H, DHP10258, P77394H, 19179425, 25094631, 25094633, FG12S, SP12S1H
Frequently Asked Questions
Does the Delphi HP10258 fuel pump hanger fit a 1987-1995 GMC P3500 V8 5.7L?
Yes, Delphi HP10258 fits the 1987-1995 GMC P3500 V8 5.7L. If your vehicle is a different one, look up its year, model and engine in the "Vehicles it fits" section.
What parts come with the Delphi HP10258 fuel pump hanger?
Delphi HP10258 comes with the float arm, a lock ring, seals and an instruction sheet.
Does the float on this fuel pump hanger match the original float height?
Yes. The empty float height and float retention match OE specifications, so the gas gauge gives a correct reading.
Should I clean the fuel tank when installing this fuel pump hanger?
Yes. Check and clean the fuel tank before the new hanger goes in. The instruction sheet in the box covers the steps.
Does Delphi HP10258 replace part number 25094631?
Yes. 25094631 is one of the numbers this hanger replaces. Every cross-reference number is on the Interchange line of this page.
