Delphi HP10150 fuel pump hanger for the 1987-1989 Ford F-150 6-cylinder 4.9L or V8 5.0L, the 1988-1989 F-150 V8 5.8L and other vehicles holds the fuel pump in the tank and carries the float arm for the fuel gauge.
- Metal tubes are routed so they never touch the tank, which removes noise and vibration while driving
- Empty float height and float retention are set for a correct gas gauge reading
- Lower amperage draw puts less load on the vehicle's electrical system
- Designed to restore fast pressure performance and system integrity with less energy
- Validated, tested and matched to the right vehicle application
Quick facts
- Part: Delphi HP10150 fuel pump hanger
- Also called: fuel pump hanger assembly
- Fits: the 1987-1989 Ford F-150 6-cylinder 4.9L or V8 5.0L, the 1988-1989 F-150 V8 5.8L and other vehicles
- Condition: New
A fuel gauge that reads wrong, hard starting or noise from the tank can mean the hanger is worn. A clogged fuel filter, a weak fuel pump or a wiring fault can be behind these signs too, so track down the real cause before you buy. This listing is one hanger, and the trucks it fits take one.
Fits
The vehicles it fits include the 1987-1989 Ford F-250 6-cylinder 4.9L, V8 5.0L or 7.5L, the 1988-1989 F-250 V8 5.8L, the 1987-1989 F-350 6-cylinder 4.9L or V8 7.5L and the 1988-1989 F-350 V8 5.8L. If your truck is not named here, open the "Vehicles it fits" section and look up your exact model and engine.
Specifications
- Quantity per vehicle: 1
- Float arm: included
- Condition: New
- Country of origin: Mexico
In the box
One fuel pump hanger with float arm, seal, lock ring and one instruction sheet.
Installation notes
- An instruction sheet comes with the part for the installation steps.
- Check and clean the fuel tank before installing the hanger.
Interchange: 951-3000 · E7TZ 9H307-D · E8TZ 9H307-DA · PFS-143
EP2068H · 4010795 · 4011167 · E2104S · E2142S · E2485 · DHP10150 · 67035 · 69100 · HS219632 · P74522S · P74581S · AFS0013P · AFS0062S · RE0062S · B0026H · A20003 · E16270 · SP1156 · SP225H · 150002 · USEP2104S
This part cross-references / interchanges with the following part numbers:
EP2068H, 4010795, 4011167, E2104S, E2142S, E2485, DHP10150, 67035, 69100, HS219632, P74522S, P74581S, 951-3000, AFS0013P, AFS0062S, RE0062S, E7TZ 9H307-D, E8TZ 9H307-DA, PFS-143, B0026H, A20003, E16270, SP1156, SP225H, 150002, USEP2104S
Frequently Asked Questions
Does the Delphi HP10150 fit the 1988-1989 Ford F-250 V8 5.8L?
Yes. Delphi HP10150 fits the 1988-1989 Ford F-250 V8 5.8L. Open the "Vehicles it fits" section to look up other models and engines.
Does the Delphi HP10150 fuel pump hanger assembly come with the float arm and lock ring?
Yes. Delphi HP10150 includes the float arm, seal, lock ring and an instruction sheet.
How does the float on this hanger affect gas gauge readings?
Empty float height and float retention match OE specifications, which gives a correct gas gauge reading.
Can a fuel gauge that reads wrong mean the hanger needs replacing?
Yes, it can. A wrong gauge reading or hard starting can come from the hanger, but a fuel filter, pump or wiring fault can do it too. A shop can test the fuel system.
Is there anything to do to the tank before installing the Delphi HP10150?
Yes. Check and clean the fuel tank first to avoid problems after installation. The instruction sheet that comes with the hanger covers the steps.
