Delphi HP10262 fuel pump hanger for the 1992-1996 Ford F-150 6-cylinder 4.9L, V8 5.0L or 5.8L and other vehicles holds the float arm and metal tubes inside the fuel tank. It is also sold as a fuel pump hanger assembly.
- Metal tubes are routed so they never touch the tank, which removes a source of noise and vibration
- Empty float height and float retention are set for a correct gas gauge reading
- Designed to operate under extreme temperatures with quick engine starts
- Lower amperage draw puts less load on the electrical system
- Validated and tested for its application, with a design aimed at lower failure rates
Quick facts
- Part: Delphi HP10262 fuel pump hanger
- Also called: fuel pump hanger assembly
- Fits: 1992-1996 Ford F-150 6-cylinder 4.9L, V8 5.0L or 5.8L and other vehicles
- Condition: New
An inaccurate fuel gauge or a rough start can have causes beyond the hanger. With the engine off, look at the fuel pump fuse for damage, and leave pressure and circuit testing to a shop. If the hanger is the cause, this assembly replaces it.
Fits
It also fits the 1992-1996 Ford F-250 6-cylinder 4.9L, V8 5.0L, 5.8L or 7.5L and the 1992-1996 F-350 6-cylinder 4.9L and the 1992-1997 F-350 V8 5.8L or 7.5L, plus many other vehicles. Each truck takes one hanger. Driving something not named here? Look up your year and engine in the "Vehicles it fits" section.
Specifications
- Quantity per vehicle: 1
- Float arm: included
- Condition: New
In the box
One fuel pump hanger with float arm, jumper harness, lock ring, retainers, seal, splices and an instruction sheet.
Installation notes
- An instruction sheet comes with the hanger for the installation steps.
- Check and clean the fuel tank during installation.
Interchange: 953-3005 · F4TZ 9A407-C · F6TZ 9A407-CA · F6TZ 9A407-CC · PFB-3
4011036 · 4017206 · 4017207 · E2064M · DHP10262 · 67003 · P74108 · P77252S · RE0026P · A46087 · FG146A · SP155 · SP2007H
This part cross-references / interchanges with the following part numbers:
4011036, 4017206, 4017207, E2064M, DHP10262, 67003, P74108, P77252S, 953-3005, RE0026P, F4TZ 9A407-C, F6TZ 9A407-CA, F6TZ 9A407-CC, PFB-3, A46087, FG146A, SP155, SP2007H
Frequently Asked Questions
Does the Delphi HP10262 fuel pump hanger fit the 1992-1996 Ford F-250 with the V8 7.5L?
Yes. Delphi HP10262 fits the 1992-1996 Ford F-250 with the 6-cylinder 4.9L and with the V8 5.0L, 5.8L or 7.5L engines.
What comes with the Delphi HP10262 hanger besides the float arm?
The box holds the Delphi HP10262 fuel pump hanger with float arm, plus a jumper harness, lock ring, retainers, seal, splices and an instruction sheet.
Will the float arm on this fuel pump hanger give a correct gas gauge reading?
The empty float height and float retention match OE specifications, which is meant to give a correct gas gauge reading.
Do the metal tubes on this hanger rattle against the fuel tank?
No. The metal tubes are routed so they never touch the tank, which removes that source of noise and vibration while the vehicle is running.
Do I need to clean the tank when installing this fuel pump hanger?
Yes, check and clean the fuel tank during installation. The instruction sheet in the box covers the installation steps.
