Delphi HP10260 fuel pump hanger for the 1995 Chevrolet Blazer V6 4.3L and other vehicles mounts inside the fuel tank and carries the float arm that feeds the gas gauge. Delphi is a global OE manufacturer of fuel delivery parts, and this fuel pump hanger assembly replaces the unit in the tank.
- Metal tubes routed so they never touch the tank, which eliminates noise and vibration during vehicle operation
- Empty float height and float retention are set for a correct gas gauge reading
- Validated and tested before it is matched to its application
- Lower amperage draw puts less load on the vehicle's electrical system
Quick facts
- Part: Delphi HP10260 fuel pump hanger
- Also called: fuel pump hanger assembly
- Fits: 1995 Chevrolet Blazer V6 4.3L and other vehicles
A gas gauge that reads wrong, a noisy tank or hard starting can mean the hanger is worn. These signs alone do not prove the hanger is at fault, because a clogged fuel filter can also make an engine hard to start. If the hanger is the cause, this one replaces it.
Fits
It fits the 1995 Chevrolet Blazer V6 4.3L and the 1995 GMC Jimmy V6 4.3L.
Specifications
- Quantity per vehicle: 1
- Float arm: included
In the box
One fuel pump hanger with float arm, lock ring, seals and an instruction sheet. This listing is one hanger, and a vehicle needs one.
Installation notes
- An instruction sheet comes with the hanger for the steps.
- Check and clean the fuel tank before installing it.
Interchange: FLS1033 · 4011048 · DHP10260 · P77374H · P77386H · 19111414 · 25168316 · SP03F1H · SP112A1H
This part cross-references / interchanges with the following part numbers:
FLS1033, 4011048, DHP10260, P77374H, P77386H, 19111414, 25168316, SP03F1H, SP112A1H
Frequently Asked Questions
Does the Delphi HP10260 fuel pump hanger fit the 1995 GMC Jimmy V6 4.3L?
Yes. Delphi HP10260 fits the 1995 GMC Jimmy V6 4.3L, as well as the 1995 Chevrolet Blazer V6 4.3L.
Does this fuel pump hanger come with a lock ring and seals?
Yes. Delphi HP10260 includes the float arm, lock ring, seals and an instruction sheet.
Does the float on this fuel pump hanger affect the gas gauge reading?
Yes. The float arm drives the gauge, and its empty float height and float retention match OE specifications for a correct gas gauge reading.
How can I tell if my fuel pump hanger is going bad?
A gas gauge that reads wrong, noise from the tank or hard starting can be signs of a worn hanger. Fuel pressure testing is best left to a shop.
Do I need to clean the tank before installing this fuel pump hanger?
Yes. Check and clean the fuel tank first, and follow the instruction sheet that comes with the hanger for the steps.
