Delphi FG0912 fuel pump module for the 2008-2012 Honda Accord 4-cylinder 2.4L and other vehicles moves fuel from the tank to the engine. Also called a fuel pump assembly, it is built to Delphi's OE standards, and its empty float height and float retention match OE specifications.
- Lower amperage draw puts less load on the vehicle's electrical system
- Empty float height and float retention that give a correct gas gauge reading
- Part is validated and tested
- Design and durability for lower failure rates
Quick facts
- Part: Delphi FG0912 fuel pump module
- Also called: fuel pump assembly
- Fits: 2008-2012 Honda Accord 4-cylinder 2.4L and other vehicles
- Condition: New
Hard starting, stalling or a fuel gauge that reads wrong can mean a worn pump module. Before you replace the module, rule out the pump relay, the fuse and the wiring to the pump, because a fault in any of them can look much the same. If the module is the cause, this one replaces it.
Fits
It also fits the 2009-2014 Acura TSX 4-cylinder 2.4L and the 2012 Honda Crosstour 4-cylinder 2.4L. The 2008-2012 Honda Accord 4-cylinder 2.4L takes one, and this listing is one module.
Specifications
- Quantity per vehicle: 1
- Condition: New
- Sold: individually
In the box
One fuel pump module with float arm, seal, lock ring and an instruction sheet.
Installation notes
- Check and clean the fuel tank before the Delphi module goes in.
- Follow the instruction sheet that comes with the part for the steps.
Interchange: 17045-TA0-A00 · 17045-TA0-L00 · 17047-TA0-A00 · 17052-TA0-L00
4010692 · E8922M · DFG0912 · P76709M · P76767M · A33117 · A42035 · C0717M · C0718M · SP8005M · USEP8922M
This part cross-references / interchanges with the following part numbers:
4010692, E8922M, DFG0912, P76709M, P76767M, 17045-TA0-A00, 17045-TA0-L00, 17047-TA0-A00, 17052-TA0-L00, A33117, A42035, C0717M, C0718M, SP8005M, USEP8922M
Frequently Asked Questions
Is this Delphi fuel pump module right for the 2009-2014 Acura TSX 4-cylinder 2.4L?
Yes. Delphi FG0912 fits the 2009-2014 Acura TSX 4-cylinder 2.4L, and that car takes one module.
What comes with the Delphi fuel pump module assembly FG0912?
The Delphi FG0912 module comes with a float arm, a seal, a lock ring and an instruction sheet.
How does the Delphi fuel module keep the gas gauge reading correct?
The float's empty height and float retention match OE specifications, which gives a correct gas gauge reading.
Which symptoms can point to a worn fuel pump module?
Hard starting, stalling or a gauge that reads wrong can come from a worn module. A shop can test fuel pressure and the pump circuit to confirm.
Does the Delphi FG0912 need anything done to the tank before installing it?
Yes. The fuel tank should be checked and cleaned before this module goes in, and the instruction sheet that comes with the part covers the steps.
