Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC1346
Delphi TC6355 front left lower control arm with ball joint for the 2011-2013 Ram 2500 and other vehicles joins the wheel to the suspension and pivots on its ball joint. This control arm and ball joint assembly replaces the arm and the joint in one piece.
A clunk over bumps or loose, wandering steering can mean the ball joint or arm is worn. Worn bushings or other suspension parts can sound alike, so find the source before replacing anything. With the engine off, look at the front tires for uneven tread wear; a shop can check the ball joint and arm for play and damage, which needs the truck lifted.
Among the trucks it fits are the 2011-2013 Ram 2500 and the 2003-2010 Dodge Ram 2500, and it works as a 2012 Ram 1500 control arm. This listing is one arm for the front left; the front right is a separate part, and the two are normally replaced together on an axle.
Fit and size
Build and materials
Interchange: 622.67026 · 52106 767AC · 52106 767AD · 52106 767AE · 52106 767AF · 52106 767AH · 52121 517AA · 52121 517AB · 52121 517AC · 52121 517AD · 52121 517AE · 521-375
52106767AA · CB81243 · CB81243PR · RK621265 · CMS251025 · CMS25192 · JTC2354
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this a 2012 Ram 1500 lower control arm?
Yes. Delphi TC6355 is the front left lower control arm with ball joint for the 2012 Ram 1500. If your truck is another year or model, look it up in the "Vehicles it fits" section.
Is this a control arm for the 2011-2013 Ram 2500?
Yes. The 2011-2013 Ram 2500 takes this arm at the front left lower position; the right side is a separate part ordered on its own.
What temperatures and salt spray can the Delphi TC6355 handle?
Delphi TC6355 withstands temperatures below -40 degrees C and over 120 degrees C, and it is exposed to 720 hours of salt spray.
What does a worn ball joint on a front lower arm feel like?
Uneven front tire wear, a clunk over bumps or steering that feels loose can mean the ball joint or arm is worn.
How is the ball joint on the Delphi TC6355 made?
Delphi machines the ball studs to micron tolerances for durability and smooth joint operation. The arm is robot welded and gets 100% crack and ultrasonic flaw detection.
No reviews yet — be the first to review this product.
Write a ReviewWARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.