Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC1346
Delphi TC7364 front left lower control arm with ball joint for the 2009-2013 Subaru Forester and other vehicles joins the front left wheel to the chassis. The ball joint is built into the arm, so this control arm and ball joint assembly arrives as one piece.
A clunk over bumps, loose steering or uneven tire wear can mean this arm or its ball joint is worn, though a tie rod end or a sway bar link may be behind them, so track down the cause first. This listing is one arm for the front left; the front right is a separate part, and the two are normally replaced together.
This is a control arm for the 2009-2013 Subaru Forester and a control arm for the 2013-2014 Subaru WRX. It also fits the 2011 Subaru Impreza and the 2012-2014 Subaru Impreza H4-2.5L.
Fit and size
Build and materials
One front left lower control arm with ball joint. The front left takes one, and the front right side is ordered separately.
Interchange: 102-8051 · 524-783
20202 SC010 · 20202 SC011 · 20202 SC012 · 20202 SC013 · KSC5906 · CB72163 · CB72163PR · RK622787 · CMS801051 · GS801051
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the lower control arm for the 2009-2013 Subaru Forester?
Yes. Delphi TC7364 is a front left lower control arm with ball joint for the 2009-2013 Subaru Forester. The front right side is a separate part.
Is this a Subaru Impreza control arm for the 2012-2014 Impreza H4-2.5L?
Yes. Delphi TC7364 fits the 2012-2014 Subaru Impreza H4-2.5L on the front left lower position, and it also fits the 2011 Subaru Impreza.
How are the ball studs made on this control arm with ball joint?
The ball studs are machined to micron tolerances for durability and smooth joint operation. The arm itself is robot welded for consistent performance and quality.
Does the Delphi TC7364 include the ball joint?
Yes. The ball joint is part of this front left lower assembly, so you receive one arm with its ball joint. The front right side is ordered separately.
Is this control arm tested for road salt exposure?
Delphi exposes its parts to 720 hours of salt spray, and Anti Corrosion protection is applied to each part. Delphi also tests them below -40 degrees C and over 120 degrees C.
No reviews yet — be the first to review this product.
Write a ReviewWARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.