Replace a leaking or sticking front right caliper and its bracket in one step with the Raybestos R-Line remanufactured caliper and bracket assembly, part number FRC11713, a floating, two-piston disc brake caliper supplied with its mounting bracket. It fits many Chevrolet, GMC and Cadillac trucks and SUVs, among them the 2005-2008 Chevrolet Silverado 1500, 2005-2008 GMC Sierra 1500 and 2007-2008 Chevrolet Tahoe (all engines). See the Buyer's Guide tab for the full list.
Raybestos R-Line calipers are remanufactured OE parts rebuilt with all-new rubber and sealing components. Castings, guide pins and brackets are carefully inspected before they are reused.
Specifications: floating caliper with two pistons, each 2.003 in (50.876 mm) in diameter; M10 x 1.50 bleeder screw thread; M14 bracket mounting holes with a 2 mm thread pitch; cast iron caliper casting; coated caliper and bracket finish; casting numbers K247-246C and Z5101. Country of origin: Mexico.
The listed applications use one caliper in the front right position. This assembly is sold individually, and replacing both front calipers together is recommended for balanced braking.
Interchange: 18-B4918 · 15-14305 · 15-14439 · 99-17383A · 18-B4918HD · 18-P4918 · 18-P4918A · 141.66043 · 11-4305 · 14-4305 · 11-26012A-1
18B4918 · 1514305 · 1514439 · 9917383A · 18B4918HD · 18P4918 · 18P4918A · 14166043 · 114305 · 144305 · 1126012A1 · SC1008
This part cross-references / interchanges with the following part numbers:
What does this caliper and bracket assembly do?
It holds the brake pads and uses hydraulic pressure on its two pistons to clamp them against the rotor. It is a floating caliper supplied with its bracket for the front right position.
Is this the right Tahoe brake caliper for a 2007-2008 Chevrolet Tahoe?
It is listed as a direct-fit front right replacement for the 2007-2008 Chevrolet Tahoe with all engines. Check the Buyer's Guide tab to confirm your vehicle.
Is this also a 2005-2008 Chevrolet Silverado 1500 brake caliper?
Yes. It fits the 2005-2008 Chevrolet Silverado 1500 and the 2005-2008 GMC Sierra 1500 with all engines, in the front right position.
What parts are replaced during remanufacturing?
Seals, boots, bleeder screws, abutment hardware, banjo bolts and O-rings are replaced with new materials. Castings, guide pins and brackets are inspected before they are reused.
What are signs a brake caliper may need replacing?
Common signs include brake fluid leaking at the caliper, the vehicle pulling to one side, a dragging or sticking brake, or uneven pad wear. Diagnose the cause first, and bleed the brakes after installing.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
