Dorman - OE Solutions Suspension Control Arm P/N:524-444
Dorman 524-226 front right lower control arm for the 2012-2016 Audi A4 and other vehicles connects the front right wheel to the chassis. Also called a suspension control arm, it lets the wheel move with the suspension while staying located.
A worn arm or bushing can mean clunking over bumps, pulling or uneven front tire wear. A worn ball joint, loose tie rod or tired strut can be behind those signs too, so find the cause before buying an arm. The left and right arms are normally replaced together, and this listing is one arm for the front right.
The 2012-2016 Audi A4, the 2015-2026 Porsche Macan and the 2012-2018 Audi A6 all take this arm, along with many other vehicles. As a direct replacement, it fits and performs like the original on those vehicles.
Fit and size
Build and materials
One control arm with its rubber bushings. A ball joint, grease fitting and mounting hardware are not included, so plan on new bolts, since the old ones may not be reusable. This listing holds one arm; the front right takes one, and the left side is a separate part.
Interchange: 102-7838 · 102-8070
TC2709 · CA4995 · 2CB70183 · RK641965 · GS701147 · CMS701147 · 2608697 · X01CA0718 · V103124 · 8K0407152F · 8K0407152G · PAC407152
This part cross-references / interchanges with the following part numbers:
Is Dorman 524-226 the right 2012-2016 Audi A4 control arm for the front right?
Yes. Dorman 524-226 is a front right lower control arm that fits the 2012-2016 Audi A4. If your car is a different one, look up its year, make and model in the "Vehicles it fits" section.
Is this a 2012-2018 Audi A6 control arm for the front right lower position?
Yes. The 2012-2018 Audi A6 is among the cars it fits, and the 2015-2026 Porsche Macan takes it too. This listing is the front right lower arm only.
Does this front right control arm come with bushings and a ball joint?
Dorman 524-226 includes its rubber bushings. A ball joint, grease fitting and mounting hardware are not included.
Is this Dorman control arm aluminum or steel?
Aluminum. This control arm is casting/forged aluminum with a powder-coated finish and measures 262.5 mm long.
How can I tell if a front control arm is worn?
Cracked or torn bushing rubber, clunking over bumps and uneven front tire wear can mean a worn arm. If you notice them, have the suspension inspected promptly.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.