Raybestos Brakes Disc Brake Caliper P/N:FRC10163
Raybestos Brakes FRC11607 front right brake caliper for the 2003-2018 Subaru Forester and other vehicles clamps the brake pad against the rotor to slow the wheel. This is a remanufactured, semi-loaded caliper and bracket assembly, and its materials match OE specifications.
A disc brake caliper that leaks fluid, drags or wears one pad faster than the other may be near the end of its life, and the car can pull to one side under braking. Before you replace this caliper, rule out worn pads, a damaged brake hose or seized guide pins as the source of the pull or drag.
The 2003-2018 Subaru Forester, 2002-2014 Subaru Outback and 2002-2015 Subaru Legacy take this caliper, and so do other vehicles. This listing is the front right caliper, one per vehicle at that corner; the front left is a separate part ordered separately. Open the "Vehicles it fits" section to check your exact model and engine.
Fit and size
Build and materials
One front right caliper and bracket assembly.
Interchange: 19-B2682B · 99-01323A · 19-P2682B · 141.47037 · SC0850-1 · 14-8569
26292AJ00A · 26292SC021
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this a Subaru Forester brake caliper replacement for the 2003-2018 Forester?
Yes. Raybestos Brakes FRC11607 is the front right caliper for the 2003-2018 Subaru Forester. Open the "Vehicles it fits" section to check your exact model and engine.
Does this Subaru Outback caliper fit the 2002-2014 Outback too?
Yes. This front right caliper fits the 2002-2014 Subaru Outback. The front left side is a separate part.
Does the Raybestos FRC11607 caliper come with the bracket?
Yes. Raybestos Brakes FRC11607 is a semi-loaded caliper and bracket assembly, supplied as one remanufactured unit.
What piston size and bleeder thread does this floating caliper have?
The piston diameter is 42.7 mm (1.681 in), and the bleeder screw thread is M10x1. The bracket mounting holes are 12.000 mm with a 1.250 mm thread pitch.
What signs can mean this front right brake caliper is sticking or leaking?
A pull to one side, a pad worn unevenly, or fluid around the caliper can mean it is sticking or leaking. Other brake parts can cause similar signs, and a shop can test the system.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.