Raybestos Brakes Disc Brake Caliper P/N:FRC11395

Be the first to review this product
$83.99
WARNING:California Proposition 65
MPN: FRC11395
UPC: 829352176849
Item Package Quantity: 1
Adding to cart… The item has been added

Have questions?

Raybestos Brakes Disc Brake Caliper P/N:FRC11395
Raybestos Brakes Disc Brake Caliper P/N:FRC11395
$83.99

Bring firm, leak-free hydraulic clamping force back to the front right corner of your Jeep with the Raybestos R-Line Remanufactured Semi-Loaded Disc Brake Caliper & Bracket Assembly (FRC11395). It drops in as a direct-fit replacement for the 1999-2004 Jeep Grand Cherokee [All], mounting in the front right position where it presses the brake pads against the rotor whenever you apply the brakes. If a leaking, sticking, or seized original caliper is behind your uneven pad wear or soft pedal, this assembly replaces it.

  • Remanufactured OE unit: rebuilt from inspected castings, guide pins, and brackets, with all-new seals, boots, bleeder screws, abutment hardware, banjo bolts, and O-rings for leak-free operation.
  • 100% pressure tested: every caliper is pressure tested, with EPDM70 rubber components for heat resistance, performance, and durability.
  • Coated caliper and bracket: a coated surface finish helps resist corrosion.
  • Semi-loaded & friction-ready: ships with its mounting bracket included; brake pads are not part of the assembly.

Built as a floating, cast-iron caliper with two pistons measuring 1.870 in (47.498 mm) and an M10X1.00 bleeder screw. Country of origin: Mexico.

Interchange: 15-11195 · 1511195 · 99-17683A · 9917683A · 18-B4826 · 18B4826 · 18-P4826 · 18P4826 · 141.58005 · 142.58005 · SC4416 · 14-1195 · 141195. Manufacturer part number FRC11395.

This part cross-references / interchanges with the following part numbers:

15-11195, 99-17683A, 18-B4826, 18-P4826, 141.58005, 142.58005, SC4416, 14-1195

Frequently Asked Questions

What vehicle does this caliper fit?

It's a direct-fit replacement for the front right position on the 1999-2004 Jeep Grand Cherokee [All]. Check the Buyer's Guide tab to confirm it matches your vehicle.

Does it include the mounting bracket and brake pads?

Yes, it ships as a semi-loaded caliper and bracket assembly, so the mounting bracket is included. It is friction-ready, meaning brake pads are not included.

Is this a new or remanufactured caliper?

It's a Raybestos R-Line remanufactured OE unit, rebuilt with all-new seals, boots, bleeder screws, abutment hardware, banjo bolts, and O-rings, then 100% pressure tested.

What are the caliper's key specifications?

It's a floating, cast-iron caliper with two pistons measuring 1.870 in (47.498 mm), an M10X1.00 bleeder screw, and a coated finish on both the caliper and bracket.

Should I replace the caliper on both sides at once?

Replacing calipers as a pair across the axle is a good practice for balanced braking, though this listing is for one caliper (the front right).