Raybestos Brakes Disc Brake Caliper P/N:FRC11589

Be the first to review this product
$88.99
MPN: FRC11589
UPC: 829352360248
Item Package Quantity: 1
Adding to cart… The item has been added

Have questions?

Raybestos Brakes Disc Brake Caliper P/N:FRC11589
Raybestos Brakes Disc Brake Caliper P/N:FRC11589
$88.99

Clamp the right-rear brake back to spec with the Raybestos R-Line Semi-Loaded Disc Brake Caliper & Bracket Assembly, MPN FRC11589 — a remanufactured OE floating caliper that squeezes the pads against the rotor to slow the wheel. It installs as a direct-fit replacement for the rear-right position on the 2005-2007 Ford F-250 Super Duty and 2005-2007 Ford F-350 Super Duty (All engines).

  • Remanufactured OE core: castings, guide pins, and brackets are carefully inspected before reuse, and new rubber and sealing components — seals, boots, bleeder screws, abutment hardware, banjo bolts, and O-rings — are installed for leak-free operation.
  • EPDM70 rubber components: chosen for heat resistance, performance, and durability; silicone boots are used on heavy-duty applications where applicable.
  • Tested & matched: materials match OE specifications and each unit is 100% pressure tested.
  • Specs: floating cast-iron caliper with a 1.89 in (48 mm) piston, a 3/8-24 bleeder screw, and 16 mm bracket mounting holes with a 2.0 mm thread pitch.

This is a semi-loaded caliper-and-bracket assembly. Replacing the caliper on both sides of the axle is a common best practice for even, balanced braking, though it isn't required. Country of origin: Mexico.

Interchange: 18-B4920 · 18B4920 · 15-13303 · 1513303 · 99-17937A · 9917937A · 16-4921 · 164921 · 18-P4920 · 18P4920 · 141.65523 · 142.65523 · SC1400 · 14-3303 · 143303
Manufacturer part number FRC11589.

This part cross-references / interchanges with the following part numbers:

18-B4920, 15-13303, 99-17937A, 16-4921, 18-P4920, 141.65523, 142.65523, SC1400, 14-3303

Frequently Asked Questions

What is FRC11589?

It's a Raybestos R-Line remanufactured semi-loaded disc brake caliper and bracket assembly for the rear-right position, rebuilt from an OE core with new seals, boots, and hardware.

Which vehicles does it fit?

The rear-right position on the 2005-2007 Ford F-250 Super Duty and 2005-2007 Ford F-350 Super Duty (All engines). Check the Buyer's Guide tab to confirm your vehicle.

Is it new or remanufactured?

Remanufactured — the original castings, guide pins, and brackets are inspected and reused, the rubber and sealing parts are replaced new, and each unit is 100% pressure tested.

What parts are replaced during the rebuild?

The seals, boots, bleeder screws, abutment hardware, banjo bolts, and O-rings are all replaced with new materials to support leak-free operation.

Should I replace both calipers at once?

It isn't required, but replacing the calipers on both sides of the axle is a common best practice for even, balanced braking. This listing covers one rear-right assembly.