Restore firm, even clamping at the front-left corner of your Ford Econoline van with the Raybestos R-Line Remanufactured Semi-Loaded Disc Brake Caliper and Bracket Assembly, MPN FRC11510. This floating caliper squeezes the brake pads against the rotor to slow the wheel, and it drops in at the front-left position on the 1996-2002 Ford E-250 Econoline, 1996-2000 Ford E-350 Econoline, 1996-2002 Ford E-350 Econoline Club Wagon, 1999-2007 Ford E-350 Super Duty, 2002-2005 Ford E-350 Club Wagon and 2003-2007 Ford E-250 (engine: All).
Remanufactured from OE parts: castings, guide pins and brackets are inspected before re-use, with all-new rubber and sealing components; materials match OE specifications.
New leak-resistant components: seals, boots, bleeder screws, abutment hardware, banjo bolts and O-rings are replaced with new materials.
EPDM70 rubber components for heat resistance, plus silicone boots on heavy-duty applications where applicable.
Verified quality: 100% pressure tested; floating cast-iron caliper with a 2.209 in (56.1 mm) piston and 3/8-24 bleeder screw thread.
Interchange: 18-B4761 · 18B4761 · 99-18039B · 9918039B · 10-314849 · 10314849 · Manufacturer part number FRC11510. Country of origin: Mexico.
This part cross-references / interchanges with the following part numbers:
18-B4761, 99-18039B, 10-314849
Frequently Asked Questions
What does this assembly include?
It is a semi-loaded caliper and bracket assembly remanufactured from OE parts, with new seals, boots, bleeder screws, abutment hardware, banjo bolts and O-rings installed for leak-resistant operation.
Which vehicles and position does FRC11510 fit?
It is the front-left caliper for the 1996-2002 E-250 Econoline, 1996-2000/1996-2002 E-350 Econoline and Club Wagon, 1999-2007 E-350 Super Duty, 2002-2005 E-350 Club Wagon and 2003-2007 E-250. See the Buyer's Guide tab.
What are signs the caliper may need replacing?
Fluid leaking at the caliper, a sticking piston, brake drag, or the vehicle pulling to one side can indicate a failing caliper. Diagnose the cause first, since these symptoms can have other sources.
Is this part new or remanufactured?
It is remanufactured. Original castings, guide pins and brackets are inspected before re-use, and all rubber and sealing components are replaced with new parts, then the unit is 100% pressure tested.
What is the piston size and caliper type?
It is a floating cast-iron caliper with a 2.209 in (56.1 mm) piston diameter and a 3/8-24 bleeder screw thread, built with EPDM70 rubber components for heat resistance.
Clamp the pads against the rotor with the Raybestos Brakes R-Line Remanufactured Semi-Loaded Disc Brake Caliper (FRC10612) — the hydraulic caliper that houses the piston and squeezes the brake pads...
Squeeze the brake pads against the rotor and keep your rear brakes working with the Raybestos R-Line Remanufactured Semi-Loaded Disc Brake Caliper and Bracket Assembly (FRC10546). This rear left unit...
Deliver firm hydraulic clamping force at the front brakes with the Raybestos R-Line Remanufactured Semi-Loaded Disc Brake Caliper and Bracket Assembly (FRC10694). This floating caliper houses the...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
