Raybestos Brakes Disc Brake Caliper FRC10611

Raybestos Brakes Disc Brake Caliper FRC10611 - view 2

Front Left Brake Caliper for 1995-2004 Toyota Tacoma - Raybestos FRC10611

Be the first to review this product

$74.99

MPN: FRC10611

UPC: 753497953150

Item Package Quantity: 1

Current Stock:

Have questions?

Ask an Expert

Raybestos Brakes Disc Brake Caliper P/N:FRC10611

$74.99

Description

Clamp the front rotor with confidence using the Raybestos R-Line Remanufactured Semi-Loaded Disc Brake Caliper (FRC10611), a direct-fit 1995-2004 Toyota Tacoma caliper for all engines. This is the front left unit, remanufactured from an OE core so it retains vehicle-specific design while all the wear-prone rubber and sealing parts are renewed.

Remanufactured OE caliper: castings, guide pins, and brackets are carefully inspected before re-use; each unit is rigorously tested for reliable braking.
New sealing components: seals, boots, bleeder screws, abutment hardware, banjo bolts, and O-rings are replaced with new materials for leak-free operation.
EPDM70 rubber: components provide heat resistance, performance, and durability; materials match OE specifications.
100% pressure tested with an M10x1 bleeder screw thread and a 2 in (50.8 mm) caliper piston diameter, on a cast-iron caliper casting.

Non-plated finish. Sold individually as one caliper; for even, balanced braking it is best practice to service the front calipers as a matched pair. If a seized, leaking, or dragging caliper is the cause of your brake trouble, this replaces it. Country of origin: Mexico.

Manufacturer's Description

Product Specs

Buyer's Guide

Interchange Part Numbers

Frequently Asked Questions

Does this fit my 1995-2004 Toyota Tacoma?

Yes. It is a direct-fit replacement for the 1995-2004 Toyota Tacoma with all engines. Confirm your vehicle in the Buyer's Guide tab before ordering.

Which side is this 1995-2004 Toyota Tacoma brake caliper?

This is the front left caliper. It is sold individually, so order the matching side separately if you need both fronts.

What is renewed on this remanufactured caliper?

The seals, boots, bleeder screws, abutment hardware, banjo bolts, and O-rings are replaced with new materials. Castings, guide pins, and brackets are inspected before re-use.

Is it pressure tested?

Yes. Every R-Line caliper is 100% pressure tested, and it uses EPDM70 rubber components for heat resistance and durability.

Should I replace both front calipers together?

It is sold individually as one caliper. Replacing both front sides as a matched pair is best practice for even, balanced braking, though not strictly required.