Raybestos Brakes Disc Brake Caliper P/N:FRC10612
Clamp the front right brake pads firmly against the rotor with the Raybestos R-Line Remanufactured Semi-Loaded Disc Brake Caliper FRC11222. This floating caliper is a direct-fit front right replacement for the 2001-2007 Chrysler Town & Country, the 2001-2003 and 2006-2007 Chrysler Voyager, and the 2001-2007 Dodge Caravan and Grand Caravan (All engines).
Materials match OE specifications to suit the vehicle-specific design. As a semi-loaded unit it comes with the abutment hardware; brake pads are ordered separately. Sold individually for the front right position — for even, balanced braking, replacing the opposite front caliper as a matched pair is a recommended best practice. Country of origin: Mexico.
Interchange: 18-B4777 · 18B4777 · 40-87041 · 4087041 · SL55959 · 99-17682B · 9917682B · 16-4777 · 164777 · 18-4777 · 184777 · 18-P4777 · 18P4777 · SL2099 · 141.63025 · 142.63025 · 5019807AA · SC0288 · C4777 · C669 · SLC669 · 6503 · S41236 · 10-1183S · 101183S · 14-1183 · 141183 · TQM25426 · 11-22130-1 · 11221301 · 11-22150-1 · 11221501. Manufacturer part number FRC11222.
This part cross-references / interchanges with the following part numbers:
Will this caliper fit my vehicle?
It is a direct-fit front right caliper for the 2001-2007 Chrysler Town & Country, the 2001-2003 and 2006-2007 Chrysler Voyager, and the 2001-2007 Dodge Caravan and Grand Caravan (All engines).
Is this a new or remanufactured caliper?
Remanufactured. It is built on inspected OE castings, guide pins, and brackets, then rebuilt with all-new seals, boots, bleeder screws, abutment hardware, banjo bolts, and O-rings, and is 100% pressure tested.
Are brake pads included?
This is a semi-loaded caliper, which includes the abutment hardware. Brake pads are not part of a semi-loaded unit and should be ordered separately.
Do I need to replace both front calipers?
It is sold individually for the front right position. Replacing the opposite front caliper as a matched pair is a recommended best practice for even, balanced braking, not a hard requirement.
What are the piston and bleeder specifications?
This floating caliper uses a 2.594 in (65.9 mm) piston in a cast-iron casting with a 3/8-24 bleeder screw thread. Bracket mounting holes are 14.0 mm with a 2.0 mm thread pitch.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.