Delphi HP10252 fuel pump hanger for the 1995 Chevrolet Tahoe V8 5.7L and other vehicles holds the fuel pump and float arm inside the fuel tank. The float arm lets the gas gauge read the fuel level.
- Pump designed to operate under extreme temperatures with quick engine starts
- Metal tubes routed so they never touch the tank, which removes noise and vibration while driving
- Empty float height and float retention set for a correct gas gauge reading
- Lower amperage draw puts less load on the vehicle's electrical system
- Hanger is validated and tested
Quick facts
- Part: Delphi HP10252 fuel pump hanger
- Also called: fuel pump hanger assembly
- Fits: 1995 Chevrolet Tahoe V8 5.7L and other vehicles
- Condition: New
A gas gauge that reads wrong, a long crank before the engine starts or a whine from the tank can mean the pump or float arm on a fuel pump hanger assembly is worn. A fuse, wiring or a clogged filter can produce similar symptoms, so look the connector over for damage with the engine off and leave fuel pressure tests to a shop.
Fits
This hanger fits the 1995 Chevrolet Tahoe V8 5.7L, the 1992-1995 GMC Yukon V8 5.7L and the 1992-1994 Chevrolet Blazer V8 5.7L. The 1995 Chevrolet Tahoe V8 5.7L takes one.
Specifications
- Quantity per vehicle: 1
- Type: hanger assembly with float arm
- Condition: New
In the box
One fuel pump hanger with float arm, lock ring, seals and an instruction sheet.
Installation notes
- Check and clean the fuel tank before installing the hanger.
- The instruction sheet in the box covers the installation steps.
Interchange: FLS1069 · 4011052 · 4011083 · 4017010 · DHP10252 · P77262S · 19179428 · 25027414 · 25029666 · 25178862 · A46081 · SP12N1H · FG12N · SP12N2H
This part cross-references / interchanges with the following part numbers:
FLS1069, 4011052, 4011083, 4017010, DHP10252, P77262S, 19179428, 25027414, 25029666, 25178862, A46081, SP12N1H, FG12N, SP12N2H
Frequently Asked Questions
Is Delphi HP10252 the right fuel pump hanger for the 1992-1994 Chevrolet Blazer V8 5.7L?
Yes. Delphi HP10252 fits the 1992-1994 Chevrolet Blazer V8 5.7L, and that Blazer takes one hanger.
Which pieces come with the Delphi HP10252 fuel pump hanger?
Delphi HP10252 comes with the float arm, a lock ring, seals and an instruction sheet.
Does this fuel pump hanger draw less current from the electrical system?
Yes. The pump is designed for a lower amperage draw, so it puts less load on the vehicle's electrical system.
Can I cross-reference Delphi HP10252 to part number 25178862?
Yes. 25178862 is one of the interchange numbers listed for Delphi HP10252, along with 19179428 and A46081.
Does the tank need any attention before installing Delphi HP10252?
Yes. Check the fuel tank and clean it before the hanger goes in. The instruction sheet in the box covers the installation steps.
