Heater Hose for 1984-1994 Ford Tempo & More - Gates 19630

$32.99

Vehicles this part fits

    Part number: 19630
    UPC: 072053178623
    Condition: New
    Weight: 0.87 LBS
    Item Package Quantity: 1
    $32.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:19630
    Gates HVAC Heater Hose P/N:19630
    $32.99
    $32.99

    Gates 19630 heater hose for the 1984-1994 Ford Tempo 4-cylinder 2.3L and other vehicles carries engine coolant to and from the heater. This Gates molded heater hose runs heater to pipe or heater to water pump.

    • Small I.D. Molded Coolant Hose line, factory-molded for smaller, tighter engine compartments
    • Used for coolant, water and air applications
    • Engineered to resist electrochemical degradation, a leading cause of hose failure
    • EPDM tube, synthetic fiber knit reinforcement and EPDM cover
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications

    Quick facts

    • Part: Gates 19630 heater hose
    • Also called: HVAC heater hose
    • Fits: 1984-1994 Ford Tempo 4-cylinder 2.3L and other vehicles
    • Position: Heater to pipe, heater to water pump
    • Material: EPDM
    • Condition: New

    Coolant seeping at a hose end, a cracked or soft spot in the rubber, or a coolant level that keeps dropping can mean the hose is worn. A leaking heater core, a failing water pump or a loose clamp can be behind these signs too, so find the cause before buying. Inspect the hose only with the engine cool. This listing is one hose, and these cars take one.

    Fits

    It fits the 1984-1994 Ford Tempo 4-cylinder 2.3L, the 1984-1994 Ford Topaz 4-cylinder 2.3L and the 1984-1994 Mercury Topaz 4-cylinder 2.3L.

    Specifications

    Fit and size

    • Position: heater to pipe, heater to water pump
    • Quantity per vehicle: 1
    • Centerline length: 18.2 in (462 mm)
    • Inside diameter, both ends: 0.75 in (19 mm)
    • Branches: none

    Build and materials

    • Construction: molded
    • Material: EPDM
    • Temperature range: -40 °F to 275 °F (-40 °C to 135 °C)
    • Condition: New
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.
    • Not for fuel or oil transfer applications.

    Interchange: E53Z 18472 B · E73Z 18472 A · E93H 18C266 AA
    16153M · 63047 · 86097 · D86097 · F11955 · 4313 · 63048 · 11630

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    16153M, 19630, 63047, 86097, D86097, F11955, E53Z 18472 B, E73Z 18472 A, E93H 18C266 AA, 4313, 63048, 11630

    Frequently Asked Questions

    Does this Gates heater hose fit the 1984-1994 Ford Topaz 4-cylinder 2.3L?

    Yes. Gates 19630 fits the 1984-1994 Ford Topaz 4-cylinder 2.3L, and the same hose fits the 1984-1994 Mercury Topaz 4-cylinder 2.3L.

    Is this a Gates 3/4 heater hose?

    Yes. Both ends of Gates 19630 have a 0.75 in (19 mm) inside diameter, and the centerline length is 18.2 in (462 mm).

    What temperature range does this hose handle?

    Gates 19630 is rated from -40 °F to 275 °F (-40 °C to 135 °C). Its construction is an EPDM tube, synthetic fiber knit reinforcement and an EPDM cover.

    Is this HVAC heater hose approved for marine use?

    Yes. This hose is approved for marine applications as well as coolant, water and air. It is not for fuel or oil transfer.

    Should I replace the hose clamps when I install this hose?

    Yes. The clamps should be replaced each time a new coolant hose is installed, so plan on fresh clamps for this heater hose.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review