Heater Hose for 2001-2003 Dodge Durango - Gates 24473

$169.99

Vehicles this part fits

    Part number: 24473
    UPC: 770075776635
    Condition: New
    Weight: 7.20 LBS
    Item Package Quantity: 1
    $169.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:24473
    Gates HVAC Heater Hose P/N:24473
    $169.99
    $169.99

    Gates 24473 heater hose for the 2001-2003 Dodge Durango V8 4.7L or 5.9L carries engine coolant to the heater at the inlet assembly. This Gates molded heater hose is built to fit specific applications.

    • Gates Modular Coolant Hose line with one integrated hose branch
    • Specifically engineered materials resist collapse under vacuum
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • EPDM tube with synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover
    • Meets SAE 20R3 EC Class D1 under 25 mm (1 in.) ID and SAE 20R4 EC Class D1 at 25 mm (1 in.) ID and over
    • Temperature range of -40 °F to +257 °F (-40 °C to +125 °C)

    Quick facts

    • Part: Gates 24473 heater hose
    • Also called: HVAC heater hose
    • Fits: 2001-2003 Dodge Durango V8 4.7L or 5.9L
    • Position: Heater - inlet assembly
    • Material: EPDM, plastic
    • Condition: New

    This Gates HVAC heater hose can wear with heat and age. Coolant drips, a sweet smell or a soft, bulged or cracked hose can mean it is failing, but a nearby clamp or connection can leak in the same way. Before replacing it, look over the hose and its clamp ends by eye with the engine off and cool.

    Fits

    This heater hose fits the 2001-2003 Dodge Durango with the V8 4.7L or 5.9L engine, and that Durango takes one.

    Specifications

    Fit and size

    • Position: Heater - inlet assembly
    • Quantity per vehicle: 1
    • Centerline length: 19.5 in (495 mm)
    • End 1 inside diameter: 0.5 in (13 mm)
    • End 2 inside diameter: 0.59 in (15 mm)
    • End 3 inside diameter: 0.72 in

    Build and materials

    • Construction: molded, modular
    • Material: EPDM, plastic
    • Condition: New
    • Country of origin: United States

    Installation notes

    • Replace the clamps each time a new coolant hose is installed.
    • Use this hose for coolant only, not for fuel or oil transfer.

    Interchange: 626-555
    27209X · 55056060AC · F11177 · 17122

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    27209X, 55056060AC, 626-555, F11177, 17122

    Frequently Asked Questions

    Will Gates 24473 fit the 2001-2003 Dodge Durango V8 4.7L or 5.9L?

    Yes. Gates 24473 fits the 2001-2003 Dodge Durango with the V8 4.7L or the V8 5.9L, and each of those engines takes one hose.

    Is this a Gates 1/2 heater hose at every end?

    No. End 1 measures 0.5 in (13 mm) inside diameter, end 2 is 0.59 in (15 mm) and end 3 is 0.72 in.

    Can I use the Gates 24473 hose for fuel or oil lines?

    No. Do not use it for fuel or oil transfer. Gates 24473 is a coolant hose.

    Should I replace the clamps when installing this heater hose?

    Yes. Replace the clamps each time a new coolant hose goes on, so the new hose is not sealed with old clamps.

    Can I keep driving with a leaking heater hose?

    No. A leaking coolant hose should be checked or replaced promptly, because losing coolant can lead to engine overheating.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review