Sealed E1006KC .50MM piston ring set for the 2009-2019 Ford Escape 4-cylinder 2.5L and other vehicles seals each piston to the cylinder wall. It also scrapes excess oil off the bore, and this set is 0.50 mm oversize.
- Chrome-plated top ring facing for demanding conditions
- Reverse torsional second ring in grey iron with a phosphate coating that seats instantly
- Second ring controls inter-ring pressure to seal the cylinder, moves heat from piston to cylinder and aids oil control
- Three-piece flex vent oil ring keeps tension uniform while assuring a positive seal
Quick facts
- Part: Sealed E1006KC .50MM piston ring set
- Also called: engine piston ring set
- Fits: 2009-2019 Ford Escape 4-cylinder 2.5L and other vehicles
- Material: Top ring steel with chrome; second ring grey iron with phosphate coating
- Condition: New
Blue exhaust smoke or rising oil use can point to worn rings, though valve seals and bore wear also burn oil. A shop can run a compression test and measure bore wear before you commit to a ring job.
Fits
Listings cover a wide range of Ford, Lincoln and Mercury models, including the 2010-2019 Ford Fusion 4-cylinder 2.5L and the 2014-2019 Ford Transit Connect 4-cylinder 2.5L. Driving something else? Run your own year and engine through the "Vehicles it fits" section.
Specifications
Fit and size
- Oversize: 0.50 mm
- Cylinders per set: 4
- Quantity per vehicle: 1
- Ring width, top / second / oil: 1.20 / 1.20 / 2.50 mm
Build and materials
- Top ring: steel with chrome
- Second ring: grey iron with phosphate coating, reverse torsional face
- Oil ring: 3 piece flex vent design
- Condition: New
- Country of origin: United States
In the box
Compression rings, rails and an oil spacer. This listing is one set for four cylinders, and the vehicle takes one set.
Interchange: 42114CP.020 · PR484.20 · S89194-.50
2C5162020
This part cross-references / interchanges with the following part numbers:
42114CP020, PR484.20, S89194-.50, 2C5162020, 42114CP.020
Frequently Asked Questions
Does the Sealed E1006KC .50MM ring set fit the 2010-2019 Ford Fusion 4-cylinder 2.5L?
Yes. Sealed Power E1006KC .50MM is listed for the 2010-2019 Ford Fusion with the 4-cylinder 2.5L engine, and that engine takes one set.
What comes in this Sealed Power engine piston ring set?
The set holds compression rings, rails and an oil spacer. One set covers all four cylinders of the engine.
What oversize is the E1006KC .50MM piston ring set?
Sealed Power E1006KC .50MM is 0.50 mm oversize. Its top and second rings are 1.20 mm wide and the oil ring is 2.50 mm wide.
What are the top and second rings made of in this ring set?
The top ring is steel with chrome, and the second ring is grey iron with a phosphate coating. The oil ring is a 3 piece flex vent design.
Does this Sealed Power ring set replace S89194-.50?
Yes. S89194-.50 is among the numbers Sealed Power E1006KC .50MM replaces, so you can use it to match an older set.
