Standard Ignition TBC622 turbocharger for the 2008-2010 Volkswagen Jetta 4-cylinder 2.0L and other vehicles uses exhaust flow to compress the air going into the engine. This new unit is made for gas engines.
- All-new fasteners and gaskets included
- All-new turbocharger, so there is no core to process
- Tested in the lab and on vehicles for performance and durability
- Journal and thrust bearings for efficiency and durability
- Cast housing for durability
Quick facts
- Part: Standard Ignition TBC622 turbocharger
- Fits: the 2008-2010 Volkswagen Jetta 4-cylinder 2.0L and other vehicles
- Condition: New
A worn turbocharger can show up as oil around its connections, a whining noise or weak boost under load, but other faults can look alike. Before replacing it, look over the intake ducting and the area around the turbo for oil or cracks with the engine off and cool; a shop can run boost tests. The engine takes one turbocharger, and this listing is one.
Fits
It fits the 2008-2013 Audi A3 4-cylinder 2.0L too, and it is a turbocharger for the 2008-2010 Volkswagen Passat 4-cylinder 2.0L. It is designed and tested for Audi and Volkswagen 2.0L turbocharged engines. If your car is not named here, find it in the "Vehicles it fits" section on this page.
Specifications
Fit and size
- Quantity per vehicle: 1
- Compressor inlet outside diameter: 63.5 mm
- Compressor outlet outside diameter: 75.184 mm
- Terminals: 2 male blade terminals
Build and materials
- Condition: New
- Geometry type: Fixed
- Wastegate type: External
- Cooling method: Water
- Country of origin: China
In the box
One turbocharger with its installation kit. The exhaust manifold, wastegate actuator, oil supply line, speed sensor and temperature sensor are not included.
Frequently Asked Questions
Is this VW Jetta turbocharger a match for the 2008-2010 Volkswagen Jetta 4-cylinder 2.0L?
Yes. Standard Ignition TBC622 fits the 2008-2010 Volkswagen Jetta 4-cylinder 2.0L. For any other car, look it up in the "Vehicles it fits" section.
Does this Audi A3 turbocharger fit the 2008-2013 Audi A3 4-cylinder 2.0L?
Yes. Standard Ignition TBC622 is listed for the 2008-2013 Audi A3 4-cylinder 2.0L, and the engine takes one turbocharger.
Does the TBC622 come with gaskets and fasteners, and what is left out?
Yes, the installation kit has new fasteners and gaskets. The exhaust manifold, wastegate actuator, oil supply line, speed sensor and temperature sensor are not included.
What cooling method and wastegate type does this turbocharger have?
This turbocharger is water-cooled, with an external wastegate and fixed geometry. The compressor inlet outside diameter is 63.5 mm and the outlet is 75.184 mm.
What bearings and housing does the Standard Ignition TBC622 turbocharger have?
It has journal and thrust bearings and a cast housing. It was tested in the lab and on vehicles for performance and durability.
