Delphi TC5438 front left lower control arm with ball joint for the 1988-1999 Chevrolet C1500 and other vehicles joins the left front wheel to the frame. This control arm and ball joint assembly comes as one unit, with the joint already on the arm, and lets the wheel pivot with steering and suspension movement.
- Tested to withstand temperatures below -40 degrees C and over 120 degrees C and 720 hours of salt spray
- 100% crack detection and ultrasonic flaw detection on each control arm to check the material
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Robot-welded control arm for consistent performance and quality
- Anti-corrosion protection applied to each part to prevent corrosion
Quick facts
- Part: Delphi TC5438 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 1988-1999 Chevrolet C1500 and other vehicles
- Position: Front left lower
- Condition: New
Clunks over bumps, uneven tire wear or loose steering can mean this arm or its ball joint is worn, though a worn tie rod end or wheel bearing can be behind the same signs, so find the cause first. Left and right lower arms are normally replaced together; this listing is one arm, and the front axle takes one on each side.
Fits
The vehicles it fits include the 1988-1999 Chevrolet C1500, the 1995-1999 Chevrolet Tahoe, the 2000 Tahoe V8-5.7L and the 1995-1999 GMC Yukon. If your vehicle is not named here, look up its year and model in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: Front left lower
- Quantity: 1 per listing, for the front left
Build and materials
- Type: control arm with ball joint, robot-welded
- Ball studs: machined to micron tolerances
- Finish: anti-corrosion protection on each part
- Condition: New
Interchange: 622.66014 · 522-177
15665554 · 19416906 · CB90223 · CK620299 · RK620299 · CMS9707 · GS9707 · JTC2400
This part cross-references / interchanges with the following part numbers:
622.66014, 522-177, 15665554, 19416906, CB90223, CK620299, RK620299, CMS9707, GS9707, JTC2400
Frequently Asked Questions
Does the Delphi TC5438 fit the 1995-1999 GMC Yukon?
Yes, the Delphi TC5438 front left lower control arm with ball joint fits the 1995-1999 GMC Yukon. It is a front left part, so the front right side is ordered separately.
Are the ball studs on this Delphi control arm machined to a set tolerance?
Yes, the ball studs are machined to micron tolerances. This is done for durability and smooth joint operation.
How is this front left lower control arm checked for flaws?
Each Delphi control arm goes through 100% crack detection and ultrasonic flaw detection. The arms are also robot-welded for consistent quality.
What can a worn front lower control arm with ball joint cause?
Clunking over bumps, uneven tire wear or loose steering can mean the arm or ball joint is worn. Have the front end inspected promptly, as it affects steering and suspension.
Is CK620299 a match for Delphi TC5438?
CK620299 is one of the interchange numbers listed for the Delphi TC5438 front left lower control arm with ball joint. The other cross-reference numbers are printed on the Interchange line.
