Timken 510038 front wheel bearing for the 1995-1998 Honda Odyssey and other vehicles lets the wheel turn smoothly on its mount.
- Design, materials and manufacturing process are tested for consistent performance
- Preset, pre-greased and pre-sealed bearing module for ease of installation
- Self-contained design that needs no maintenance
- Ball bearing with a four-hole flange for M10x1.25 bolts
Quick facts
- Part: Timken 510038 wheel bearing
- Also called: wheel bearing assembly
- Fits: 1995-1998 Honda Odyssey and other vehicles
- Position: Front
- Material: Steel
- Condition: New
A worn wheel bearing assembly can show up as a hum or growl that changes with speed, or as vibration felt through the floor. These signs alone do not prove the bearing is the problem, since an uneven tire can make a similar noise.
Fits
As a front wheel bearing, it fits the 1995-1998 Honda Odyssey, the 1995-1997 Honda Accord and the 1997-1999 Acura CL, and each takes two. This listing is one bearing, and both front sides are normally replaced together. If your car is not named here, find it in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: Front
- Quantity per vehicle: 2
- Drive type: Non-driven
- Outside diameter: 85.50 mm (3.366 in)
- Inside diameter: 45.00 mm (1.772 in)
- Hub pilot diameter: 86 mm (3.386 in)
- Cone width: 47.00 mm (1.850 in)
- Flange bolt holes: 4, bolt size M10, thread M10x1.25
Build and materials
- Bearing type: Ball bearing
- Construction: Bearing module
- Material: Steel
- Flange shape: Modified
- Pre-greased: Yes
- Condition: New
In the box
One bearing module. The hub, wheel studs, ABS sensor, wiring harness and a separate gasket or seal are not included.
Interchange: 051-4144 · 405.40004
FW184
This part cross-references / interchanges with the following part numbers:
051-4144, 405.40004, 510038, FW184
Frequently Asked Questions
Is Timken 510038 the front or rear 1995-1997 Honda Accord wheel bearing?
It is a front bearing. Timken 510038 is listed for the 1995-1997 Honda Accord, and the car takes two.
Is Timken 510038 a Timken wheel bearing and hub assembly?
No. Timken 510038 is a bearing module only. The hub, wheel studs, ABS sensor and wiring harness are not included.
What are the diameters of the Timken 510038?
Timken 510038 has an outside diameter of 85.50 mm (3.366 in), an inside diameter of 45.00 mm (1.772 in) and a hub pilot diameter of 86 mm (3.386 in).
Are Timken front wheel bearings like this one pre-greased and sealed?
Yes. Timken 510038 comes preset, pre-greased and pre-sealed, and its self-contained design needs no maintenance.
What can a worn wheel bearing sound like?
A hum or growl that changes with speed, or vibration through the floor, can point to a worn bearing. A shop can confirm the cause.
