Raybestos Brakes FRC11307 rear right brake caliper for the 2011-2018 Ram 1500 and other vehicles clamps the brake pad against the rotor to slow the wheel. This remanufactured semi-loaded caliper and bracket assembly uses all new rubber and sealing components.
- Raybestos R-Line non-plated remanufactured caliper
- New seals, boots, bleeder screws, abutment hardware, banjo bolts and O-rings
- Castings, guide pins and brackets inspected before reuse
- Silicone boots for heavy-duty applications, where applicable
- 100% pressure tested
- EPDM70 rubber components for heat resistance and durability
Quick facts
- Part: Raybestos Brakes FRC11307 brake caliper
- Also called: disc brake caliper
- Fits: 2011-2018 Ram 1500 and other vehicles
- Position: Rear right
- Material: Cast iron
- Condition: Remanufactured
A sticking or leaking disc brake caliper can show up as a pull to one side, a burning smell from one rear wheel or uneven pad wear. Other brake parts can produce these signs too, so with the engine off, a quick look for wet fluid around the caliper is a sensible first check. A shop can test the hydraulics.
Fits
This rear right brake caliper is a direct-fit replacement for the 2011-2018 Ram 1500, the 2002-2010 Dodge Ram 1500 and the 2003-2009 Dodge Durango. If your vehicle is not named here, find its year and model in the Vehicles it fits section on this page. Each rear wheel has its own caliper, so this one is for the rear right only; the rear left is a separate part, and the pair is normally replaced together.
Specifications
Fit and size
- Position: rear right
- Quantity per vehicle: 1
- Caliper type: floating
- Piston diameter: 53.9 mm (2.122 in)
- Bracket mounting hole size: 14.000 mm, thread pitch 2.000 mm
- Bleeder screw thread: M10x1
Build and materials
- Type: semi-loaded caliper and bracket assembly
- Casting material: cast iron
- Finish: non-plated
- Condition: remanufactured
- Country of origin: Mexico
In the box
One remanufactured semi-loaded caliper and bracket assembly.
Interchange: 18-B4836 · 99-17697A · 16-4836 · 18-4836 · 18-B5097 · 18-P4837 · 141.63538 · SC2016-1 · 14-1089
SC2068
This part cross-references / interchanges with the following part numbers:
18-B4836, 99-17697A, 16-4836, 18-4836, 18-B5097, 18-P4837, 141.63538, SC2016-1, SC2068, 14-1089
Frequently Asked Questions
Is FRC11307 a rear right 2011-2018 Ram 1500 brake caliper?
Yes. Raybestos Brakes FRC11307 is a rear right caliper for the 2011-2018 Ram 1500 and also fits the 2002-2010 Dodge Ram 1500. Look up other vehicles in the Vehicles it fits section.
Is this one of the 2003-2009 Dodge Durango calipers for the front or the rear?
It is a rear right caliper. Raybestos Brakes FRC11307 fits that side of the 2003-2009 Dodge Durango; the left side takes its own caliper.
Which parts are replaced with new ones in this remanufactured caliper?
Seals, boots, bleeder screws, abutment hardware, banjo bolts and O-rings are replaced with new materials. Castings, guide pins and brackets are inspected before they are reused.
What piston size and bleeder thread does this rear right caliper have?
Raybestos Brakes FRC11307 has a 53.9 mm (2.122 in) piston diameter and an M10x1 bleeder screw thread.
How can I tell if a rear caliper is sticking?
A pull to one side, a burning smell from one rear wheel or uneven pad wear can mean a sticking caliper, but other brake parts can be the cause too. Have it checked promptly.
