Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC1346
Delphi TC3744 front right lower control arm with ball joint for the 2014-2015 Kia Sorento and other vehicles connects the front right wheel to the vehicle and lets the suspension move. The ball joint lets the wheel turn and travel up and down.
A clunk over bumps, loose or wandering steering or uneven front tire wear can mean the arm or its ball joint is worn. A sway bar link, strut or tie rod end can be behind those signs too, so find the cause before you buy. This listing is one arm: the 2014-2015 Kia Sorento takes one on the front right, and the front left is ordered separately. Both sides are normally replaced together.
This lower control arm with ball joint is a direct-fit replacement for the 2014-2015 Kia Sorento, the 2012-2018 Hyundai Santa Fe and the 2013-2019 Hyundai Santa Fe XL. Open the Buyer's Guide tab to check your exact model and engine.
Fit and size
Build and materials
Interchange: 102-7810 · 524-718 · 54501-2W200 · 54501-2W600 · 54501-4Z500 · 54501-2P200 · 54501-2P201
545014Z000 · KSC5075 · CB60354 · CB60354PR · RK623282 · RK623538 · CMS901215
This part cross-references / interchanges with the following part numbers:
Is this a 2014-2015 Kia Sorento control arm for the front right side?
Yes, Delphi TC3744 fits the 2014-2015 Kia Sorento in the front right lower position; the left side is a separate part.
Is this a 2012-2018 Hyundai Santa Fe control arm for the front right side?
Yes, it fits the 2012-2018 Hyundai Santa Fe in the front right lower position. For other models, open the Buyer's Guide tab to check your exact vehicle.
Does the Delphi TC3744 control arm and ball joint assembly include the ball joint?
Yes. The ball joint is part of this front right lower control arm, and its ball studs are machined to micron tolerances.
What signs can point to a worn lower control arm or ball joint?
A clunk over bumps, wandering steering or uneven front tire wear can mean the arm or ball joint is worn. A shop can check the joint for play.
What tests does this Delphi control arm go through?
Delphi TC3744 undergoes 100% crack and ultrasonic flaw detection. Delphi parts withstand below -40 °C, over 120 °C and 720 hours of salt spray.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.